Recommended Use: interior and exterior walls,ceiling and gypsum surfaces
Finish look: Matt
Application Tools: Roller,brush or airless spray
Unit: Barrel 60 K
Matt Plastic paint for walls from Sipes
Priming walls and ceilings is mandatory when you're painting new drywall or painting over a dark color. But it's good to prime any time you paint. Primer provides three most important features. First, it blocks stains from bleeding through. Second, it enables one-coat coverage for the paint. Third, and most important, it increases paint adhesion, which greatly decreases blisters and peeling.
Professional painters will usually tint the paint primer toward the finished color by mixing a small amount of topcoat paint into the primer. This trick greatly increases the ability of the topcoat to absolutely hide the primed surface.
You can now buy paints that contain primers, but practically nothing covers as well or increases adhesion as much as a dedicated primer.
Plastic Swift Is a smooth and matt excellent finish, produced from Polymer based on water and has very additives. available in white color and wide range of colors by using Tinting machine bases, the technical parameters of colors obtained by mixing colorants to these bases would vary, owing to this colors chosen.
-Drying time : Generally, drying time related to air circulation, temperature, layer numbers and thickness.
Dry to handel : 30 Minutes ( minimum)
Dry to recoat : 2 Hours ( minimum)